 |
Corby Ind Product List |
|
| Pic |
Cat/
Prt# |
PN |
Desc |
| |
 | 21-1000 | 1000 | System 1
Single-door Access Control System ● 250 users, 50 event buffer, 3 time schedules, forced entry, door ajar, request-to-exit, serial printer output, non-volatile EEPROM ● 1 main relay, 1 aux relay ● Program with built-in keypad & LED display or full duplex RS232 using PC or VDT ● Keypad, bar code, magnetic stripe, 30-bit Weigand, 30-bit prox, data chip ● Requires 48-4301 for data chip ● Includes transformer, mounting hardware, 50' eight conductor wire ● Does not support 26-bit cards ● Cabinet: 9' W x 12" H x 4.5" D (229mm x 305mm x 114mm) |
| |
 | 22-2003 | 2003 | System 2
Single-door Access Control System ● On-site programming w/built-in keypad ● RS-232 port for local programming & monitoring w/VDT or PC or printing ● Up to 424 users per panel ● 8 time schedules, anti-passback, temp users, holidays, door ajar, forced entry, emergency drop inputs, request-to-exit input, zone input ● 1 main relay, 1 aux relay & 1 voltage output ● Supports keypads, data chip, 26 & 30-bit Wiegand & proximity, mag stripe or bar code ● Call Corby to purchase 2nd door option ● Upgradeable to networked System 2000 ● 54-8021 RS-232 to Ethernet Adapter available ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 22-2016 | 2016 | System 2
Two-door Access Control System ● Expandable to 16 doors ● On-site programming w/ built-in keypad ● RS-232 port for local or remote programming & monitoring w/ VDT or PC or printing ● 2700>4090 users per panel, 16 time schedules, anti-passback, temp users, holidays, door-ajar, forced-entry, time-cancel, emergency drop inputs, request-to-exit inputs, zone inputs ● 2 main relays, 2 aux relays & 2 voltage outputs ● Supports keypads, data chips, 26 & 30-bit Wiegand & proximity, mag stripe or bar code ● Upgradeable to networked System 2000 ● 54-8021 RS-232 to Ethernet Adapter available ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 22-2018 | 2018 | Data Chip Programming Wand - System 2
Use to program data chips into any System 2 Access Control System ● The wand plugs into a RJ-11 jack connection on the system motherboard ● Metal contact surface at head of probe guides data chip for quick & easy enrollment ● Wand handle made from lightweight, durable plastic ● Compatible w/ iButton ● 3' (1m) cable with RJ-11 plug ● Wand: 0.75" Dia x 4" L (19mm x 102mm) |
| |
 | 25-4000 | 4000 | System 5 Full-Featured
Master Access Control System panel ● Supports 4 doors ● Expand to 8 doors by adding a 25-4009 Slave panel ● 750 users, 64 time zones, 16 holidays, 250 event buffer, door-ajar, request-to-exit, forced entry, relay time-cancel, anti-passback, RS-232 output ● 4 main relays & 1 aux relay ● Supports keypads, data chips (requires 54-4301 for data chip), 26 & 30-bit Wiegand & proximity, mag stripe or bar code (requires 54-4141 for card technologies) ● Can program w/ a VDT or PC ● Includes serial printer, video display terminal, 52-4020 keypad, backup/restore CD-ROM, battery & transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 25-4005 | 4005 | System 5 Partial-Featured
Same as full-featured System 5, but does not include the video display terminal or serial printer ● See part #25-4000 for full system details ● Usually used with existing PC for programming & printing ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 25-4009 | 4009 | System 5 Expansion Panel
Also called a "slave" control unit ● Connects to a master panel (25-4000) via 3 shielded wires ● Increases total system capacity to 8 doors, 8 zones and 1 aux ● All functions of the slave panel are the same as the master, except the master is used for all programming functions ● Telecommunications Board (41-4021) not included nor required with slave expansion panel ● Includes battery and transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 26-4405 | 4405 | System 10 Door Port Module (DPM)
1 DPM is required for each 4 Doors ● Expandable to 32 DPMs or 128 doors ● 4 main relays and 1 aux relay ● Supports 2000 users, 8 time schedules, 64 time zones, 16 holidays, RS-232 output, door ajar, forced entry, relay time cancel, request-to-exit, zone monitoring, anti-passback ● Supports keypads, data chips (requires 54-4301 for data chip), 26 & 30-bit Wiegand, 26 & 30-bit proximity, magnetic stripe, bar code (requires 54-4141 for cards technologies) ● Requires: 26-4450 PC, 26-4406 digi board, 26-4410 software ● Includes battery, transformer, surge protector ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 26-4406 | 4406 | Communications Board for System 10
Four (26-4406) boards can be installed for the full compliment of 32 DPMs & 128 doors ● Includes 8-channel cable, micropeeper RS-232 LED monitor/troubleshooter, null modem, software ● 4.75" W x 8.437" L x 0.75" H (95mm x 215mm x 19mm ) |
| |
 | 26-4407 | 4407 | Communications Board for System 10
Board only ● Does not include 8-channel cable ● Four (26-4406) boards can be installed for the full compliment of 32 DPMs & 128 doors ● 4.75" W x 8.437" L x 0.75" H (95mm x 215mm x 19mm ) |
| |
 | 26-4409 | 4409 | 8-Channel Cable
Cable assembly only ● Use with 26-4406 or 26-4407 System 10 communcations board |
| |
 | 26-4410 | 4410 | System 10 Software
MS-DOS-based software required to program DPM (26-4405) via System 10 PC (26-4450) ● Software only runs on DOS 6.2 or greater ● Dual communicating software sends commands to panel (DPM) & receives event updates from panels for storage to hard drive ● Used for programming, communications, recording of events, generating customized reports & administrating data base ● Includes hardware & software manuals & disks |
| |
 | 26-4440 | 4440 | System 10 Computer - Tower
Tower with keyboard only ● Does not include monitor or communications board ● Replacement parts for System 10 PC 26-4450 ● 90-day warranty ● Tower: 7.3" W x 16.7" L x 18.3" H (185mm x 424mm x 465mm) |
| |
 | 26-4441 | 4441 | System 10 Computer - Monitor
Monitor only ● Does not include keyboard ● Replacement parts for System 10 PC 26-4450 ● Monitor: 19" W x 18" L x 17" D (483mm x 457mm x 432mm) |
| |
 | 26-4450 | 4450 | System 10 Computer
Mini-Tower with keyboard, MS-DOS, floppy drive, 17" color monitor ● Supports 128 doors ● Requires 26-4406 communciations board & 26-4410 software ● CORBY can preload software & install digi board ● Also available loaded with system 5 software @ customer's request ● 90-day warranty ● Tower: 7.3" W x 16.7" L x 18.3" H (185mm x 424mm x 465mm) Monitor: 19" W x 18" L x 17" D (483mm x 457mm x 432mm) |
| |
 | 28-2000 | 2000 | System 2000
Windows®-based Access Control System ● Includes Network Interface Controller (NIC) & software ● Requires PC for programming & at least one control panel (28-2025) for access control ● PC communicates with NIC via serial port ● NIC communicates with all control panels via four RS-485 channels ● Each channel communicates with up to 31 panels for a total of 248 doors ● Includes battery, transformer, loopback tester, serial cable ● See sales sheet for complete list of features, maximum users & compatible products ● Cabinet: 9" W x 12" L x 4.5" D (229mm x 305mm x 114mm) |
| |
 | 28-2017 | 2017 | Data Chip Programming Wand - System 2000
Use to program data chips into the System 2000 PC ● This wand is identical to the 22-2018 but includes a RJ-11>RS232/serial adapter ● PC must have an available serial port ● Metal contact surface at head of probe guides data chip for quick & easy enrollment ● Wand handle made from lightweight, durable plastic ● Compatible w/ iButton ● 3' (1m) cable with RJ-11 plug ● Wand: 0.75" Dia x 4" L (19mm x 102mm) |
| |
 | 28-2025 | 2025 | Control Panel - System 2000
See part #28-2000 for full system details ● Complete hardware support for 2 doors, 2 main relays, 2 aux relays, 2 voltage outputs, emergency drop inputs, request-to-exit inputs and zone inputs ● Terminal inputs support all card technologies, data chips and keypads ● Fail-safe distributed system ● Includes battery and transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) |
| |
 | 31-4079 | 4079 | Proximity Reader - 26-Bit - Classic
Indoor-Outdoor ● Reads 26-bit Class IM cards up to 5" (127mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● One of our most popular readers ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Will retrofit to classic-style Wiegand sized swipe readers ● Does not read 30-bit UltraSecure™ Class IM cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 2.3" x 5.3" x 0.8" (58mm x 135mm x 20mm) [Classic] |
| |
 | 31-4080 | 4080 | Proximity Reader - 26-Bit - Mullion Style
Indoor-Outdoor ● Slim-line, fits most narrow door frames ● Reads 26-bit Class IM cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black only ● 1.7" x 5.5" x 0.7" (43mm x 140mm x 17mm) [Legacy] |
| |
 | 31-4081 | 4081 | Proximity Reader - 26-Bit - Wall Plate Size
Indoor-Outdoor ● Reads 26-bit Class IM cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black ● Size: Standard wall plate size ● 3" x 4.5" x 0.7" (76mm x 114mm x 17mm) [Legacy] |
| |
 | 31-4082 | 4082 | Proximity Reader - 26-Bit - Mid-Range
Indoor-Outdoor ● Reads most 26-bit Class IM cards up to 12" (305mm) under ideal conditions ● Flex Pass System ● 4-14VDC ● Tri-color LED ● Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 5.1" x 6.1" x 1.1" (130mm x 155mm x 28mm) [Arch] |
| |
 | 31-4083 | 4083 | Proximity Reader - 26-Bit - Long-Range
Indoor-Outdoor ● Reads most 26-bit Class IM cards up to 28" (711mm) under ideal conditions ● Flex Pass System ● 12VDC @ 1.2A ● 24VDC @ 900mA ● Oversized tri-color LED ● Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black only ● 11.2" x11.2" x 1.8" (282mm x 284mm x 46mm) [Arch] |
| |
 | 31-4085 | 4085 | Proximity Card - 26-Bit
Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit readers cannot read this card ● Rugged, long-wearing design ● Pre-punched slot makes it easy to hang from lanyard or key retractor ● Credit Card size: 2.13" x 3.38" x 0.065" (54mm x 86mm x 2mm) |
| |
 | 31-4086 | 4086 | Proximity Keyfob - 26-Bit
Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit readers cannot read this card ● Rugged, double-sealed construction ● Long-wearing design ● Small, lightweight & easy to use ● Built to withstand harsh operating environments ● Re-enforced hole ensures years of use ● Dimensions: 1.197" x 1.725" x 0.215" (30mm x 44mm x 5mm) |
| |
 | 31-4087 | 4087 | Proximity Card - 26-Bit - Photo ID
Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit readers cannot read this card ● Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm) |
| |
 | 32-4177 | 4177 | Proximity Reader - UltraSecure™ 30-Bit - Classic
Indoor-Outdoor ● Reads 30-bit Class IM UltraSecure™ cards up to 5" (127mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● One of our most popular readers ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Will retrofit to classic-style Wiegand sized swipe readers ● Does not read 26-bit Class IM cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 2.3" x 5.3" x 0.8" (58mm x 135mm x 20mm) [Classic] |
| |
 | 32-4178 | 4178 | Proximity Reader - UltraSecure™ 30-Bit - Mullion Style
● Indoor-Outdoor ● Slim-line, fits most narrow door frames ● Reads 30-bit Class IM UltraSecure™ cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black only ● 1.7" x 5.5" x 0.7" (43mm x 140mm x 17mm) [Legacy] |
| |
 | 32-4179 | 4179 | Proximity Reader - UltraSecure™ 30-Bit - Wall Plate Size
● Indoor-Outdoor ● Reads 30-bit Class IM UltraSecure™ cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black ● Size: Standard wall plate size ● 3" x 4.5" x 0.7" (76mm x 114mm x 17mm) [Legacy] |
| |
 | 32-4180 | 4180 | Proximity Reader - UltraSecure™ 30-Bit - Mid-Range
● Indoor-Outdoor ● Reads most 30-bit Class IM UltraSecure™ cards up to 12" (305mm) under ideal conditions ● Flex Pass System ● 4-14VDC ● Tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 5.1" x 6.1" x 1.1" (130mm x 155mm x 28mm) [Arch] |
| |
 | 32-4181 | 4181 | Proximity Reader - UltraSecure™ 30-Bit - Long-Range
● Indoor-Outdoor ● Reads most 30-bit Class IM UltraSecure™ cards up to 28" (711mm) under ideal conditions ● Flex Pass System ● 12VDC @ 1.2A ● 24VDC @ 900mA ● Oversized tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black only ● 11.2" x11.2" x 1.8" (282mm x 284mm x 46mm) [Arch] |
| |
 | 32-4190 | 4190 | Proximity Card - UltraSecure™ 30-Bit
● Class IM card ● Use ONLY with any Class IM UltraSecure™ 30-bit prox reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 26-bit readers cannot read this card ● Rugged, long-wearing design ● Pre-punched slot makes it easy to hang from lanyard or key retractor ● Credit Card size: 2.13" x 3.38" x 0.065" (54mm x 86mm x 2mm) |
| |
 | 32-4192 | 4192 | Proximity Keyfob - UltraSecure™ 30-Bit
● Class IM card ● Use ONLY with any Class IM UltraSecure™ 30-bit prox reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 26-bit readers cannot read this card ● Rugged, double-sealed construction ● Long-wearing design ● Small, lightweight & easy to use ● Built to withstand harsh operating environments ● Re-enforced hole ensures years of use ● Dimensions: 1.197" x 1.725" x 0.215" (30mm x 44mm x 5mm) |
| |
 | 32-4194 | 4194 | Proximity Card - UltraSecure™ 30-Bit - Photo ID
● Class IM card ● Use ONLY with any Class IM UltraSecure™ 30-bit prox reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Class IM 26-bit readers cannot read this card ● Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm) |
| |
 | 33-4302 | 4302 | Data Chip Reader
Indoor ● Flush mount ● One 12VDC green LED with 6" (152mm) flying leads ● Standard size aluminum single-gang plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 2.75" W x 4.5" L x 1" D (70mm x 114mm x 25mm) |
| |
 | 33-4303 | 4303 | Data Chip Reader
Indoor ● Flush mount ● One each 12VDC green and red LEDs with 6" (152mm) flying leads ● Standard size aluminum single-gang plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 4.5" W x 2.75" L x 1" D (114mm x 70mm x 25mm) |
| |
 | 33-4304 | 4304 | Data Chip Reader
Indoor ● Flush mount ● One 12VDC green LED with 6" (152mm) flying leads ● Standard size aluminum mullion sized plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 1.375" W x 3.125" L x 1" D (35mm x 79mm x 25mm) |
| |
 | 33-4305 | 4305 | Data Chip Reader
Indoor ● Flush mount ● One each 12VDC green and red LEDs with 6" (152mm) flying leads ● Standard size aluminum mullion sized plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 1.375" W x 3.125" L x 1" D (35mm x 79mm x 25mm) |
| |
 | 33-4306 | 4306 | Data Chip Reader
Read head only ● 12VDC Green LED included ● Low profile ● Single hole mounting 0.315" Dia (8 mm) ● Perfect for OEM applications or special small footprint installations ● 6" (152mm) data wires attached ● Compatible with iButton ● 0.83" Dia x 0.40" H (21mm x 10mm) |
| |
 | 33-4307 | 4307 | Data Chip Reader
Indoor/outdoor ● Surface mount ● One 12VDC bi-color LED ● High impact black ABS plastic mullion sized housing ● Virtually indestructable ● Corrosion-proof ● Long lasting back-lit read head with 12" (304mm) leads ● Compatible with iButton ● 1.5" W x 4" L x 1" D (38mm x 102mm x 25mm). |
| |
 | 33-4318 | 4318 | Data Chip
For System 2 or 2000 ● Can be mounted to badges, photo ID cards or any smooth surface ● Nearly indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial number ● Use our 33-4323 tape dots to securely attach the chips to any desired surface ● Not for use with Systems 1, 4, 5, 10 & single-door readers ● 0.642" Dia x 0.126" Thick (15mm x 2mm) |
| |
 | 33-4319 | 4319 | Data Chip and Key Fob
For System 2 or 2000 ● Nearly indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial number ● Chip is securely mounted on a rugged stainless steel key fob with Corby logo ● Custom logos available ● Not for use with Systems 1, 4, 5, 10 & single-door readers ● Chip: 0.642" Dia x 0.126" Thick (15mm x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x .38mm) |
| |
 | 33-4320 | 4320 | Data Chip and Key Fob
Use with Corby Systems 1, 4, 5, and 10 and all single-door readers ● Special batch codes ensure proper operaton with these systems ● Nearly indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial number ● Mounted on a rugged stainless steel key fob with Corby logo ● Custom logos available (S.O.) ● Not for use with Systems 2 and 2000 ● Chip: 0.642" Dia x 0.126" Thick (15mm x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x .38mm) |
| |
 | 33-4321 | 4321 | Data Chip
For use with all Corby Systems 1, 4, 5, 10, & single-door readers ● Secure mount to badges, photo ID cards or any smooth surface ● Special batch codes ensure proper operation with these systems ● Nearly indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial number ● Use our 33-4323 tape dots to securely adhere the chips to any desired surface ● 0.642" Dia x 0.126" Thick (15mm x 2mm) |
| |
 | 33-4322 | 4322 | Data Chip - Keytag
Stainless steel keytag with etched Corby logo ● Use with 33-4318, 33-4321 or 33-4331 data chips ● Requires 33-4323 tape dot ● Pre-punched hole for affixing to key ring ● Custom logos available (S.O.) ● 2" x 0.7" (51mm x 18mm) |
| |
 | 33-4323 | 4323 | Data Chip - Tape Dots
Use to adhere our 33-4318, 33-4321 or 33-4331 data chips to any desired surface ● Acrylic adhesive foam with double sided peel-off paper ● Good for general bonding at elevated temperatures ● Hundreds of uses possible ● Provided on a roll of 100 pieces ● 0.6" dia x 0.063" Thick (15mm x 2mm) |
| |
 | 33-4324 | 4324 | Data Chip - Plastic Tag Holder
For use with our 33-4331 Thick Cannister Data Chip ● Black ● Secures the chip without tape or adhesives ● Chip inserts and snaps into the holder ● Pre-punched hole for affixing to key ring ● Angled design for easy presentation to reader ● Durable and weather resistant ● 1.5" W x 0.75" L x 0.25" Thick (19 mm x 38mm x 6mm) |
| |
 | 33-4331 | 4331 | Data Chip - Thick Cannister
For System 2 or 2000 ● Nearly indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has its own internal and unique 64-bit serial number ● Thick-style metal cannister ● Use our 33-4323 tape dots to securely adhere the chips to any desired surface ● Fits our 33-4324 Data Chip Tag Holder ● Not for use with Systems 1, 4, 5, 10 & single-door readers ● 0.642" dia x 0.188" Thick (16mm x 5mm) |
| |
 | 34-4151 | 4151 | Bar Code Card
Use with all Corby systems ● Must use swipe reader 34-4160 ● Corby graphics on front of the card ● CODE 39 bar code and 17-digit decimal number are printed on rear ● Red "anti-copy" shield is printed over the bar code ● Durable & reliable ● Credit card size ● 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm) |
| |
 | 34-4152 | 4152 | Bar Code Labels
Encoded, self-stick bar code labels ● Can be attached to any card type to add bar code technology ● 39 per sheet ● Minimum order: 1 sheet |
| |
 | 34-4160 | 4160 | Bar Code Reader
Indoor/Outdoor ● Easy vertical or horizontal surface mount ● Durable polycarbonate design ● Bi-directional decoding allows card swiping in either direction ● Clock and data format ● Use with all Corby Systems ● Reads standard CODE 39 bar code format ● Bi-color LED ● Reads Corby Card 34-4151 ● Color: Black ● 1.7" W x 5.05" L x 1.54" H (43mm x 128mm x 39mm) |
| |
 | 35-4073 | 4073 | Magnetic Stripe Card
Plain white ● Full-length magnetic stripe with ABA Track II encoding on rear ● Five-digit hot stamped number on each card represents digits six through ten within the sixteen total numbers encoded ● Works with all Corby systems using the 35-4075 reader ● Rugged and long-wearing design ● Non-photo ID ● Custom logo and printing available (SO) ● Credit card size ● 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm) |
| |
 | 35-4074 | 4074 | Magnetic Stripe Card
Use with 35-4075 reader ● Corby Logo ● ABA Track II encoding ● Five-digit code number hot stamped on card will not wear off ● Rugged long-wearing design ● Credit card size ● Dimensions: 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm) |
| |
 | 35-4075 | 4075 | Magnetic Stripe Reader
Beige ● Indoor/Outdoor ● Easy vertical or horizontal surface mount ● Textured powder-coated finish ● Treated with anti-corrosion film ● Die cast metal casing ● Clock and data format ● Use with all Corby Systems ● Reads standard ABA Track II cards ● Bright dual LED indicator ● 1.95" W x 5.5" L x 1.3" H (50mm x 140mm x 33mm). |
| |
 | 36-4166 | 4166 | Proximity Keyfob - UltraSecure™ 30-Bit
● Class H card ● Use ONLY with Class H readers 36-4173, 36-4174, 36-4175, 36-4176 ● Durable ● Reliable ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● 0.9" W x 1.9" L x 0.16" Thick (23mm x 48mm x 4mm) |
| |
 | 36-4167 | 4167 | Proximity Card - UltraSecure™ 30-Bit
● Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● Non Photo-ID ● HID logo ● Rugged, long-wearing design ● Pre-punched slot makes it easy to hang from a lanyard or key retractor ● Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm) |
| |
 | 36-4168 | 4168 | Proximity Card - UltraSecure™ 30-Bit - Photo ID
● Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 ● Accepts most computer generated images using dye-sublimation process ● Use with Corby Systems1, 2, 4, 5, 10, & 2000 ● HID logo ● Rugged, long-wearing design ● Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm) |
| |
 | 36-4169 | 4169 | Proximity Micro Tag - 26-Bit
Class H card ● Use ONLY with Class H readers 36-4173, 36-4174, 36-4175, 36-4176 ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● Self-sticking, small disk-shaped Lexan transponder ● Easy, cost-effective way to turn a plastic ID badge into a proximity credential ● Coin-sized tag attaches to any non-metallic material ● Weight: 0.04 oz (1.18g) ● 1.28" x 0.07" (33mm x 2mm) |
| |
 | 36-4170 | 4170 | Proximity Keyfob - 26-Bit
Class H card ● Use ONLY with Class H readers 36-4173, 36-4174, 36-4175, 36-4176 ● Durable ● Reliable ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's systems ● Not compatible with Corby System 1 ● 0.9" W x 1.9" L x 0.16" Thick (23mm x 48mm x 4mm) |
| |
 | 36-4171 | 4171 | Proximity Card - 26 bit
Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● Non Photo-ID ● HID logo ● Rugged long-wearing design ● Pre-punched slot makes it easy to hang from a lanyard or key retractor ● Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm) |
| |
 | 36-4172 | 4172 | Proximity Card - 26 bit - Photo ID
Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 ● Accepts most computer generated images using dye-sublimation process ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● HID logo ● Rugged long-wearing design ● Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm) |
| |
 | 36-4173 | 4173 | Proximity Reader - Extended Range
Indoor-Outdoor ● Will read most 26 and 30-bit cards from 27" (685mm) under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader ● Color: dark gray ● 12" W x 12" L x 1" Thick (305mm x 305mm x 25mm) |
| |
 | 36-4174 | 4174 | Proximity Reader - Medium Range
Indoor-Outdoor ● Will read most 26 and 30-bit cards from 9" (228mm) under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader ● Color: dark gray ● 5" W x 5" L x 1" Thick (127mm x 127mm x 25mm) |
| |
 | 36-4175 | 4175 | Proximity Reader - Thin Line
Indoor-Outdoor ● Will read most 26 and 30-bit cards from 4" (101mm) under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader ● Color: beige ● 4.7" W x 3" L x 0.68" Thick (119mm x 76mm x 17mm) |
| |
 | 36-4176 | 4176 | Proximity Reader - Mullion Style
Indoor-Outdoor ● Slim-line, fits most door frames ● Will read most 26 and 30-bit cards from 5" (127mm) under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader ● Color: dark gray ● 6" W x 1.7" L x 1" Thick (152mm x 43mm x 25mm) |
| |
 | 37-4201 | 4201 | Proximity Reader - Mullion Style
Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit UltraSecure™ cards up to 4" (102mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Size fits narrow door frames ● Use with Corby Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's systems ● Ivory & black trim plates included ● 1.5" W x 3" L x 0.5" Thick (38mm x 76mm x 12mm) |
| |
 | 37-4203 | 4203 | Proximity Reader - Single-Gang
Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit UltraSecure™ cards up to 5" (127mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Use with Corby Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's systems ● Ivory & black trim plates included ● 3" W x 4.5" L x 0.38" Thick (76mm x 114mm x 10mm) |
| |
 | 37-4204 | 4204 | Proximity Reader - Mid-Range
Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit UltraSecure™ cards up to 14" (356mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Use with Corby Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's systems ● Cost effective mid-range reader for hands-free performance ● Ivory & black trim plates included ● 6" W x 8.5" L x 1" Thick (152mm x 216mm x 25mm) |
| |
 | 37-4215 | 4215 | Proximity Card - 26-Bit
Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● May also work with other manufacturer's systems ● Pre-punched vertical badge slot ● 2.2" W x 3.4" L x 0.06" Thick (55mm x 86mm x 1.5mm) |
| |
 | 37-4218 | 4218 | Proximity Keyfob - 26-Bit
Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● May also work with other manufacturer's systems ● 1.2" W x 1.5" L x 0.15" Thick (29mm x 36mm x 4mm) |
| |
 | 37-4219 | 4219 | Proximity Card - UltraSecure™ 30-Bit
● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Pre-punched vertical badge slot ● 2.2" W x 3.4" L x 0.06" Thick (55mm x 86mm x 1.5mm) |
| |
 | 37-4220 | 4220 | Proximity Card - UltraSecure™ 30-Bit - Photo ID
● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Accepts most computer generated images using dye-sublimation process ● White, glossy finish ● 2.12" x 3.38" x 0.031" (54mm x 86mm x 1mm) |
| |
 | 37-4222 | 4222 | Proximity Keyfob - UltraSecure™ 30-Bit
● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 1.2" W x 1.5" L x 0.15" Thick (29mm x 36mm x 4mm) |
| |
 | 38-4042 | 4042 | Wiegand Reader
Beige ● Surface mount ● Indoor & outdoor swipe style ● Bi-color LED indication ● Use with Wiegand technology swipe cards ● Molded high-impact plastic enclosure ● Rugged and waterproof ● Installation finishing decals included ● 2.3" W x 5.3" L x 1.7" H (58mm x 135mm x 43mm) |
| |
 | 38-4044 | 4044 | Wiegand Reader
Black ● Surface mount ● Indoor & outdoor swipe style ● Bi-color LED indication ● Use with Wiegand technology swipe cards ● Molded high-impact plastic enclosure ● Rugged and waterproof ● Installation finishing decals included ● 2.3" W x 5.3" L x 1.7" H (58mm x 135mm x 43mm) |
| |
 | 38-4045 | 4045 | Wiegand Swipe Card - 26-Bit
Credit card size ● Durable ● Works with all Corby systems except System 1 ● May also work with other manufacturer's systems ● Use with readers 38-4042 & 38-4044 ● 5" W x 3.375" L x 0.037" Thick (43mm x 86mm x 1mm) |
| |
 | 38-4049 | 4049 | Wiegand Swipe Card - UltraSecure™ 30-Bit
● Credit card size ● Durable ● Reliable ● Works with all Corby systems ● Each card has its own unique non-duplicatable number ● Use with readers 38-4042 & 38-4044 ● 2.125" W x 3.375" L x 0.037" Thick (43mm x 86mm x 1mm) |
| |
 | 38-4076 | 4076 | Wiegand Key Token - 26-Bit
Use only with the 38-4077 Wiegand Sensorkey reader ● Works with Corby Systems 2, 4, 5, 10 & 2000 and most other systems that accept the generic 26-bit format ● Not compatible with Corby System 1 ● Color: black ● 1" W x 3.2" L x 0.92" Thick (25mm x 83mm x 2.3mm) |
| |
 | 38-4077 | 4077 | Wiegand Sensorkey Reader
Miniature insertion reader ● Low profile, in-the-wall reader ● 5-12 VDC ● Reads 38-4076 & 38-4078 Wiegand key tokens ● Color: black ● Also available: chrome (S.O.) ● 1.62" L x 1.50" W x 2" D (41mm x 38mm x 51mm) |
| |
 | 38-4078 | 4078 | Wiegand Key Token - UltraSecure™ 30-Bit
● Use only with the Corby 38-4077 Wiegand Sensorkey reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Color: black ● 1" W x 3.2" L x 0.92" Thick (25mm x 83mm x 2.3mm) |
| |
 | 38-4149 | 4149 | Wiegand Card - UltraSecure™ 30-Bit
● Graphics quality ● Both sides printable using dye sublimation process ● Use with readers 38-4042 or 38-4044 ● High security 30-bit encoding format works with all Corby systems ● Durable ● Reliable ● Each card has its own unique non-duplicatable number ● Credit card size ● 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm) |
| |
 | 39-4057 | 4057 | Badge Clip
Metal lapel clip with vinyl snap strap ● Ideal for photo ID cards ● 25 per pack ● 3.5" (89mm) |
| |
 | 39-4097 | 4097 | Punch Tool
Heavy-duty hand-held slot punch tool ● Punch vertical or horizontal slots in applicable proximity, Wiegand, bar code or mag stripe cards ● Use with 39-4057 badge clips |
| |
 | 41-1008 | 1008 | System 1 Motherboard
This PCB is a direct replacement for all versions of the Corby System 1 ● It fits into the current & old style cabinet ● This board only outputs a 9600 Baud rate for the printer or PC ● 6.75" W x 5.6" L x 1.2" H (172mm x 142mm x 30mm) |
| |
| 41-2021 | 2021 | System 2 Motherboard
Replacement for one-door System 2 (22-2003) ● Fits into the existing System 2 cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm) |
| |
| 41-2024 | 2024 | System 2 Motherboard
Replacement for two-door System 2 (22-2016) ● Fits into the existing System 2 cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm) |
| |
| 41-2028 | 2028 | System 2000 Control Panel Motherboard
Replacement for two-door 28-2025 ● Fits into the existing System 2000 Control Panel cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm) |
| |
 | 41-2030 | 2030 | System 2000 Network Interface Card
Replacement board for 28-2000 ● Fits into the existing NIC cabinet or 98-4059 replacement cabinet ● 5.75" W x 6.75" L x 1.3 " H (146mm x 171mm x 33mm) |
| |
 | 41-4021 | 4021 | Telecommunications Board
Daughter board plugs onto the main control board ● Allows full RS-232 send & receive communications with Systems 4, 5, & 10 ● Additional RS-232 port for on-site printer audit trail ● Provides RS-232 port for modem and PC communications for reporting and programming ● 2.5" W x 4.3" L x 0.5" H (64mm x 109mm x 13mm) |
| |
 | 41-4028 | 4028 | System 4 Motherboard
Master Control Unit (MCU) ● Fits into an exisitng System 4 steel cabinet or our part 98-4058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm) |
| |
| 41-4029 | 4029 | System 5 Motherboard
Master Control Unit (MCU) ● Replacement board for 25-4000 and 25-4005 ● Fits into an existing System 5 steel cabinet or our part 98-4058 ● Does not include 41-4021 telecommunications daughter board ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm) |
| |
| 41-4030 | 4030 | System 4 & System 5 Expansion Board
● Slave Control Unit (SCU) ● Replacement board for 25-4009 ● Fits into an existing slave control unit steel cabinet or our part 98-4058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm) |
| |
| 41-4031 | 4031 | System 10 Motherboard
Door Port Module (DPM) ● Replacement board for 26-4405 ● Fits into an existing System 10 steel cabinet or our part 98-4058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm) |
| |
 | 51-4100 | 4100 | Video Display Terminal
14" amber monochrome screen ● 101 key ASCII Keyboard ● Controls any device using a RS-232 console connection ● Use with systems 1, 2 or 5 with direct connection via RS-232 cable ● Perfect for long term monitoring of systems ● NOTE: This is not a computer and is not capable of preforming backup functions ● 12.7" W x 13.2" L x 12.3" D (323mm x 335mm x 312mm) |
| |
 | 52-4012 | 4012 | System Keypad - Outdoor
Standard-Size Keypad ● Surface mount, aluminum housing w/ spring-loaded cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● Includes a rear-mount sealing gasket ● Surface mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x 4.6" L x 0.875" D (71mm x 117mm x 22mm) |
| |
 | 52-4014 | 4014 | System Keypad - Hidden View
Indoor model ● Single-gang, surface mount housing ● Standard-size keypad ● Red and green 12VDC LEDs (see 81-0043 & 81-0044) ● Front tamper switch installed ● Keypad mounted in recessed tray for secure code entry ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● 3" W x 4.625" L x 2.8" D ( 76mm x 17mm x 71mm) |
| |
 | 52-4016 | 4016 | 4000 Series Control Board
Replacement circuit board ● Plugs on rear of all Corby 4000 series keypads (52-4012 through 52-4066) ● Converts keypad decimal output to BCD format ● Use only with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Includes two 6" (152mm) quick-connect wire harnesses ● 1.6" W x 2.3" L x 0.5" H (41mm x 58mm x 13mm) |
| |
 | 52-4020 | 4020 | System Keypad - Indoor
Single-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red and green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 0.4" D (53mm x 40mm x 10m) |
| |
 | 52-4064 | 4064 | System Keypad - Lock-Box
Outdoor model ● Large, cast metal heavy-duty keypad ● Mounted in a secure, locked enclosure w/ hinged, vandal-resistant, stainless steel face plate ● Red and green built-in 12VDC LEDs ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● Includes lock and key set ● Easily mounts on an optional 97-4061 gooseneck pedestal ● 4.75" W x 5.3" L x 5.5" D (120mm x 133mm x 145mm) |
| |
 | 52-4066 | 4066 | System Keypad - Outdoor
Large Heavy-Duty Keypad ● Weather-resistant, cast metal mounted in custom plate ● Red and green built-in 12VDC LEDs ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● Includes a sealing gasket ● Surface mounts easily with an optional 95-0014 tamper-proof back box ● 3.23" W x 5" L x 0.4" D (84mm x 127mm x 10mm) |
| |
 | 53-2032 | 2032 | Cable Null Modem
9-pin female > 9-pin female ● For programming System 2 with a PC ● Use with 22-2003 or 22-2016 System 2 panels |
| |
| 53-3666 | 3666 | Cable
Custom cable ● Use to connect a 41-4021 telecommunicaions board to a System 5 PC ● 12' (4m) |
| |
 | 54-2019 | 2019 | USB > RS232/Serial DB9 Adapter
● |
| |
 | 54-4056 | 4056 | Line Extender Module (LEM)
Use with any Corby or non-Corby card reader that outputs a Wiegand or clock & data format ● Solves extended wiring run challenges ● Each LEM requires 12VDC @ 1.2 amp and extends the output data an additional 500' (152m) ● Three are required for a wire run of 2000' (610m) ● An additional 12VDC power supply 92-4094 is needed every 2000' (610m) ● 1.7" W x 3.375" L x 0.562" H (43mm x 86mm x 14mm) |
| |
 | 54-4068 | 4068 | Zone Reporter Module (ZRM)
Provides real time zone monitoring with history reports ● Retrofits to Corby Systems 4, 5, or 10 ● Each monitored point is identified as a user code on the access control system ● Follows access system programming as any other user ● Hundreds can be installed on one system ● Operates on 12VDC ● 2" W x 3.25" L x 0.5" H (51mm x 83mm x 13mm) |
| |
 | 54-4141 | 4141 | Reader Interface Module (RIM)
Enables System 5 or System 10 to use card reader technology ● Translates card reader outputs into a format understood by the system ● Works with 26 & 30-bit Wiegand & proximity as well as bar code and magnetic stripe cards ● Reader connects to RIM and requires a 12VDC @ 1 amp power suppy such as Corby 92-4094 ● Small size allows for mounting inside of system cabinet ● 2.3" W x 3.44" L x 1" H (58mm x 87mm x 25mm). |
| |
 | 54-4301 | 4301 | Data Chip Adapter Module
For Systems 1, 4, 5 or 10 ● Enables these legacy systems to use modern data chip (iButton) technology ● Installs between system panel and any read head ● Stores a maximum of 30 different data chip batch numbers ● Translates data chip information into legacy BCD format ● Works only with these data chips: 33-4320 and 33-4321 ● Requires 12VDC @ 250 ma ● 2" W x 3.25" L x 1" H (51mm x 83mm x 25mm) |
| |
 | 54-8021 | 8021 | RS-232 to Ethernet Network Adapter
Works with Systems 1, 2, 5 & 2000 ● Allows system programming through a computer network ● Retrofits many other serial-based devices ● IP addressable ● Configures with easy web-based interface ● Program systems from anywhere in the world ● Extends the range of serial connection to unlimited distances ● 0.9" W x 2.5" L x 3.5" H (23mm x 64mm x 114mm) |
| |
 | 55-4118 | 4118 | Short Haul Modem
Extends RS-232 communications up to 1 mile ● Use with System 2 and other devices using RS-232 communications and hardware flow control ● Direct 4-wire connection eliminates need for PSTN phone modem ● One modem is required on each end of the communication link ● 2.1" W x 3.8" L x 1" H (64mm x 97mm x 25mm) |
| |
 | 55-4120 | 4120 | Modem
Use with System 5 control panel ● Establishes communications between System 5 control panel and PC or VDT ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4121 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
 | 55-4121 | 4121 | Modem
Use with System 5 PC or VDT ● Establishes communications between System 5 PC or VDT and control panel ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4120 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
 | 55-4122 | 4122 | Communications Kit
Includes modem and 41-4021 telecommunications board ● Use with System 10 DPM ● Establishes communications between System 10 DPM and PC ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4123 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
 | 55-4123 | 4123 | Modem
Use with System 10 PC ● Establishes communications between System 10 PC and DPM ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4122 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
 | 55-4125 | 4125 | Short Haul Modem
Extends RS-232 communications up to 1 mile ● Use with Systems 1, 5, 10 or any other device using RS-232 communications and no flow control ● Direct 4-wire connection eliminates need for PSTN phone modem ● One modem is required on each end of the communication link ● 2.1" W x 3.8" L x 1" H (64mm x 97mm x 25mm) |
| |
 | 55-4126 | 4126 | Modem
Use with System 1 or 2 PC or VDT ● Establishes communications between System control panel and PC or VDT ● High quality commercial modem ● Robust error correction and line filtering ● Requires a second Corby 55-4126 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
 | 55-4127 | 4127 | Modem
Use with System 2000 PC or NIC ● Establishes communications between System 2000 NIC and PC ● High quality commercial modem ● Robust error correction and line filtering ● Requires a second Corby 55-4127 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm) |
| |
| 56-3001 | 3001 | Manual - System 1
Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections ● Answers to frequently asked questions |
| |
| 56-3002 | 3002 | Manual - System 2
Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections ● Answers to frequently asked questions |
| |
 | 56-3003 | 3003 | Manual - System 2000 - NIC
Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections ● Answers to frequently asked questions |
| |
| 56-3004 | 3004 | Manual - System 4/5
Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections ● Answers to frequently asked questions |
| |
| 56-3010 | 3010 |
